How to tie the White Akroyd - Fiskesnack.com - För oss bakom flötet...

Allmänt meddelande

Collapse
No announcement yet.

How to tie the White Akroyd

Collapse
X
 
  • Filter
  • Klockan
  • Visa
Clear All
new posts

  • How to tie the White Akroyd

    Denna artikel är på engelska men jag hoppas det går bra ändå.

    Artikeln är insänd av:
    Jonas Andersson
    Sportfiskebutiken Ingarö http://www.sportfiskebutiken.se

    -----------------------------------------------------------------------

    How to tie the White Akroyd.

    Let’s start with the hook, for making this an simple guide I have chosen to use an 1/0 Mustad 80500B Salmon hook. First of all add the thread to the hook as follows.



    The next things to do are adding the back tinsel.



    Wrap the tinsel forward to the hook point and secure (leave no gaps!).



    Now you have to choose a matching topping from a Golden Pheasant, Put it between you fingers and hold against the top of the hook. Make three rounds with the thread have a look so it’s in place and then correct and secure.



    Now it’s time for the small Jungle Cock feathers one of each side of the topping but place them a bit above.



    The next things to add are the black Ostrich herl. Tie it in and make 3-4 round and secure make sure the fibres are pointing backwards. If they point wrong change the direction.



    Now it’s time to add some stuff start with adding the yellow cock then I usually ad one 10cm of small oval gold tinsel and one 10cm small silver and last 10cm medium oval silver tinsel.



    For the body add 1/3 of yellow/gold seal dubbing.



    After you have secured the yellow/gold seal dubbing 1/3 of the hook it’s time for the tinsels i usually start with the medium silver tinsel 2 rounds and secure. Then I take the small oval silver tinsel besides the medium tinsel 2 rounds and secure. Now you take the small oval gold tinsel reverse round over the two other tinsel 2 rounds and secure.



    Now take the Yellow cock and wrap 3 round pushing all fibres backwards and secure.



    Add the black colour heron feather wet the fingers and push the fibres backwards then secure to the hook.



    Because this fly has a dubbing body I cheating cutting the tinsels and add them again to get them nice looking. So add the tinsels as above again and then take black seal dubbing and wrap some rounds near the end of the hook and secure.



    Ok so back to the tinsel 3 round of the silver oval medium tinsel and secure. 3 rounds of the small oval silver tinsel and secure. Finally 3 reversed rounds of small gold tinsel and secure.



    Take the heron and make 4-5 rounds forward while pushing the fibres backwards and secure.



    Wet the heron fibres drag them down and backwards gently.



    Add a natural Guinea Fowl feather with right length of fibres.



    Make 3 rounds with the Guinea fowl pushing the fibres backwards secure and wet the fibres drag them down gently.



    Now the hard part take 2 small strips of white Swan (Turkey will do) if you can’t get Swan. Turkey is a lot cheaper to, mount the wings and secure them.



    Add some Jungle Cock to the sides (I like it) secure the wing properly and start building a small head.



    Add one thin layer of clear varnish on the head. It makes the head hard then the clear
    Varnish is much more effective blending with the thread.



    When the varnish has dried add one thin layer of black varnish.



    The last thing to do is one more layer of clear varnish on the head to give it a really good look.



    The finished White Akroyd congratulations! You have to excuse me for my lack of English but hopefully you will understand anyway. I’m not an expert tier just doing some fishing flies and of course having fun meanwhile good luck and happy tying.

    Tight Lines,
    Jonas Andersson (Swe-Classic)
    Copyright 2004 Sportfiskebutiken Ingarö http://www.sportfiskebutiken.se

    C&R hit och C&R dit Det är egentligen bara sunt förnuft som gäller

    Bli medlem i Sportfiskarna Här!
    Svar på vanliga frågor hittar ni Här
    Fiskesnacks regler hittar ni Här
    Gilla Fiskesnack.com på Facebook http://www.facebook.com/Fiskesnackcom

  • #2
    Väldigt snygg artikel, välskriven och bra foton. Fin fluga dessutom. Well done...
    "Det är ingen idé att skynda sig om man inte vet var man är på väg. Man vet ju ändå inte när man är framme" - Nalle Puh
    "Keep it simple"

    //Jan O
    www.fisheco.se
    www.brofiske.net
    www.magazinefisheco.se

    Kommentera


    • #3
      Nice! Har ett gäng häger hemma nu så det ska bindas upp nu till vintern!

      Kommentera


      • #4
        vad kul att höra, tack så mycket.
        http://www.smackibacken.se Resor
        http://puls.smackibacken.se Blogg
        http://www.bindsex.se Flugor

        Kommentera


        • #5
          Flyttad från annan tråd.

          Att binda en klassisk laxfluga är verkligen, precis som vi här så tydligt och fint får det presenterat, ett konsthantverk av hög dignitet. Snyggt jobbat Fiskebutiken!

          Tänka sig att långt in på förra seklet band man på Hardy's i London alla laxflugor utan att ta hjälp av bindstäd! Flugan hölls i en hand och det var noga med att bindtrådens spänning blev den rätta för att flugan skulle hålla. När man tillägnat dig den konsten fullt ut vilket tog sin tid fick man tillstånd att delta i den kommersiella produktionen av flugor.

          En White Akroyd är ett litet konstverk i sig. De flesta gamla laxflugor brukar ha en anektdot om hur de skapades eller fick sitt namn. Undrar hur den här flugans bakgrund ser ut?
          Senast ändrad av BeBest; 2004-10-11, 15:26.
          Må vi alla ha ett intressant fiske!

          Kommentera


          • #6
            Det är många proffsbindare som fortfarande idag binder sina flugor helt för hand. Flera av de som binder "konstflugor" som bara är till för visning och inte fiskning. Hur de gör det kan jag inte riktigt förstå.

            Än så länge har jag bara bundit enklare hårvingeflugor men jag ska försöka mig på lite mer avancerade mönster.

            Kommentera


            • #7
              Allt är beroende på krokstorleken..Har du en 5/0:a att binda på så går det förvånanvärt bra...Lite marigare med mindre krok..

              Kommentera


              • #8
                Denna gjorde jag på en 2:a en allround storlek i mitt tycke. Än så länge är jag för mycket amatör för att kunna få till det utan städet svårt nog som det är redan. Men om ett par år ja vem vet
                http://www.smackibacken.se Resor
                http://puls.smackibacken.se Blogg
                http://www.bindsex.se Flugor

                Kommentera


                • #9
                  Den blev mycket fin, och du har alldeles rätt. Det tar några år med en massa misslyckade flugor innan dom börjar bli riktigt, riktigt bra..Men det är lite av charmen tycker jag

                  Kommentera


                  • #10
                    det tycker jag med annars skulle man ju inte ha några fiskeflugor alls det skulle vara lite tråkigt! blir ju fjäder nästa år för allt lax och havsöringsfiske
                    http://www.smackibacken.se Resor
                    http://puls.smackibacken.se Blogg
                    http://www.bindsex.se Flugor

                    Kommentera

                    Foton

                    Collapse

                    Det finns inga resultat som uppfyller dessa kriterier.

                    Relaterat

                    Collapse

                    Ämnen Statistik Senaste inlägg
                    Startad av andreas@ramtveten.se, 2024-08-08, 15:34
                    1 svar
                    160 visningar
                    0 gillar
                    Senaste inlägg .art
                    av .art
                     
                    Arbetar...