<Hjälp!> Safety bolt rig

[SpecimenHunter_Rasmus]

Hej!
Jag har haft problem med trassel med mina boltrigs så nu köpte jag äntligen ett "Anti tangle system" men får inte riktigt ihop det!

Det jag har köpt är Kevin Nash Safety Bolt Rig och här kommer en bild :



Det jag inte fattar är det där allt ska ihop med sänket... jag vet hur sänket ska hakas på den plastsaken och sen trär jag över den högra "plastsaken" men sen så har dom klämmt in ett lekande som jag inte riktigt fattar hur man ska sätta in!
Och hur sätter man fast den långa tuben i den högra "plastsaken"??
det skulle vara bra om någon skulle kunna förklara allt för mig

MVH Rasmus

[Carpoholic]

I would be able to help you mate, if i could read what you have written

[Carpoholic]

I use them aswell

[SpecimenHunter_Rasmus]

okey mate i can translate it to english... wait 10 minutes or so!

[Carpoholic]

OK mate

[SpecimenHunter_Rasmus]

Hi!
I dont get how to put it all together.
I Know how to put the lead onto the "plastic thing" to the left and then put over the right " plastic thing".
But I dont understand how to get the swivel to fit in! Shall I push it in from the left? I tried but it didnt go so well...

Then I dont understand how to get the long tube to into the right "plastic thing"... Shall I only push it through??

[SpecimenHunter_Rasmus]

Something like that!

[Carpoholic]

Here is a pic of one on my rigs

[SpecimenHunter_Rasmus]

ok but how do the swivel stuck in the rig? is it just pushed in?

[Carpoholic]

Thread your main line (reel line) through the anti-tangle tubing first. Then thread the tail rubber (cone shaped rubber thing) on to your line, thin end first. Then thread the safety bead on so it all fits together like in the picture, not forgetting to attach your lead.
Then tie the reel line to the swivel and push the safety bead over the swivel so it sits tight. This is what makes the "Bolt" effect. But if you get snapped the lead will come away from the line and the fish will not have to carry around the lead.

I will up load a pic of the rig broken down so you can see how to do it.