Erik Walmann: Novak igjen

[Erik Walmann]

[FONT=Arial]New Saber trolling bait. These large sleek solid resin crankbaits are made one at a time. Every step, from making the molds, to cutting the diving lips, is done by me. I'm always trying to think of ways to improve on my designs. This big crank was designed for one thing in mind, to take trophy class fish. The heavy gauge lexan diving lip is held in place first by being glued to the resin body then having the 500lb. rated stainless line tie wire holding it in place, and lastly the lip itself has 2 heavy stainless screws fastening it to the resin body. Lip has been polished to a satin finish (See Photo). This bait has my new Extreme-Glitter finish on it. While a pain to do, the final result is worth the effort. Bait shown has 6 coats of thick epoxy with 2 more coats to go. Finish is very resistant to teeth or hook rash. At 2mph the saber will hit 30 ft with 85ft. of 80# powerpro out.[/FONT]
[FONT=Arial]* 11 Inches Long[/FONT]
[FONT=Arial]* Hand poured solid resin body[/FONT]
[FONT=Arial]* High Detail painted finish [/FONT]
[FONT=Arial]* 1/2 Inch hand painted 3D eyes.[/FONT]
[FONT=Arial]* Heavy Duty stainless Hardware with 5/0 Hooks[/FONT]
[FONT=Arial]* Multible Heavy coats of UV resistant epoxy finish[/FONT]
[FONT=Arial]*Deep Diving high speedTrolling bait will dive to 30+ ft.[/FONT]
[FONT=Arial]*Heavy gauge Lexan Diving Lip[/FONT]

http://cgi.ebay.com/Novak-Musky-Musk...#ht_786wt_1139


Läs mer...

(Detta inlägg har postats automatiskt)